ABS Pumps - ABS lifting station Piranhamat 701

Type key Example: ABS Piranhamat 701
Piranhamat
 Synthetic Pumping Station
W & D
 W (230V) D (400V)
Properties:  
Flow up to: 8 m³/h
  Head, max 31m
Head, Max: 31m

ABS Piranhamat 701 - lifting station

Flood-proof lifting station for the automatic pumping of sewage from areas below the backwash level in accordance with EN 12050-1. The Piranhamat 701 is used for the reliable and economic discharge of wastewater under pressure using small diameter discharge lines. Suitable for new installations or for renovation of old buildings.

Features

  • Ready for installation; robust, compact tank, suitable for single-family houses.
  • Easily transported and fitted. Compact dimensions allow passage through a standard door opening.
  • Fitted with ABS Piranha submersible grinder pump for problem-free pumping of sewage and wastewater containing faecal matter in pipe lines from 1¼” diameter (DN 32).
  • Nine horizontal inlet ports (6 x DN 100, 3 x DN 40) and four vertical (2 x DN 70, 2 x DN 40). One DN 70 port is needed as a vent line. DN 40 is suitable for the connection of a hand membrane pump.
  • Pumps high head up to 30 m. Most suitable for applications with minimum head of 8 m.
  • Cast iron discharge outlet with threaded flange G 1¼”.
  • Shredding system consisting of a spiral bottom plate containing a stationary cutter ring with cutting edges and a shredding rotor located below the impeller, reduces the medium for optimum blockage-free running.
  • Shaft sealing between motor and hydraulic section by means of a single mechanical seal of silicon carbide, independent of direction of rotation,resistant to temperature shock and to dry running. Motor side: lip seal, oil lubricated.
  • Motor shaft is mounted in lubricated-for-life, maintenancefree ball bearings.
  • Maximum allowable temperature of the medium for continuous use is 40 °C; or up to 60 °C for intermittent use (max. 5minutes).

Tank

Synthetic, corrosion-resistant, gas- and odour-tight tank, in accordance with EN 12050-1. Supplied as standard with pump and control panel with automatic level control and alarm.

Capacity: 70 litres

Motor

Water pressure sealed, squirrel cage 2-pole induction motor, with double shaft seals and oil chamber. Electronic monitoring of stator temperature and overcurrent.

Insulation: Class F for 155 °C
Protection type: IP 68

Materials

Description Material
Tank Polyethylene (PE)
Motor Housing Cast iron EN-GJL-250
Rotor Shaft Stainless steel 1.4021 (AISI 420)
Volute Cast iron EN-GJL-250
Impeller Cast iron EN-GJL-250
Bottom Plate Cast iron EN-GJL-250
Fasteners
 Stainless steel 1.4401 (AISI 316)

Technical Data

Piranhamat 701W 701D
Motor power* (kW)
 P1 = 2.3 P2 = 1.7 P1 = 2.3 P2 = 1.7
Speed (r/min) 2900 2900
Rated voltage (V) 220-240 1~ 400 3~
Rated current (A) 7.0 4.0
Cable type (S1BN8-F) 4G1.5 4G1.5
Cable length (m)** 4.0 4.0
Weight (kg)***
 58
 58

* P1 = Power taken from mains; P2 = Power at motor shaft;
** Tank to control unit 4 m, control unit mains 1.5 m;
*** Additional weight with hand membrane pump = 13 kg

Downloads

 

Should you require further information regarding any of the products or services we offer, or to arrange a sales appointment, call: 020 8991 6650 or e-mail sales@spse.co.uk

If you have a pumpstation or pumping equipment requirement and you know what you are looking for click here if you are unsure complete our online pump station enquiry form here, we can provide a proposal please remember to complete all fields.

Alternatively if you would like one of our friendly, experienced team to make contact with you, complete and submit our request a call back form by clicking here.

ABS Pumps Product Links

ABS Pumps Only

ABS Pumps Lifting Stations

More Links

Resources

Contact