ABS Pumps - ABS Submersible sewage Pump EffeX range XFP 80C-150E

Type key Example: ABS XFP 80C CB1.3 PE22/4-C-50
XFP
 Submersible Sewage Pump
8 Discharge outlet DN (cm)
0
 Hydraulic number
C
 Volute opening (dia. mm)
CB
 Impeller type
1
 Number of impeller vanes
3
 Impeller size
Motor:  
PE Premium Efficiency
22 Motor power P2 kW x 10
4 Number of poles
C
 Volute opening (dia. mm)
Properties:  
Flow up to: 300 m³/h
  Head, max 45m
Head, Max: 45m

ABS XFP 80C-150E - Submersible sewage Pump

Robust, reliable, submersible pumps, with premium efficiency motors from 1.3 to 11.0 kW. For the pumping of wastewater and sewage from buildings and sites in private, commercial, industrial and municipal areas in accordance with EN 12050-1.

Features

  • The water-pressure-tight, encapsulated, fully flood-proof motor and the pump section form a compact, robust, modular construction.
  • NEMA Class A temperature rise.
  • Premium Efficiency motors in accordance with IEC 60034-30 level IE3 with testing in accordance with IEC60034-2-1.
  • Continuously rated motor in submerged and non-submerged applications.
  • Double mechanical seals; SiC-SiC at the medium side, SiC-C at the motor. All seals are independent of rotation direction and resistant to temperature shock.
  • Anti-wicking cable plug solution.
  • High-efficiency hydraulic design with Contrablock (80E) or Contrablock Plus (80C, 100C, 100E & 150E) impeller.
  • Free solids passage of minimum 75 mm.
  • Lubricated-for-life bearings with a calculated life time of min. 50,000 hours.
  • Stainless steel shaft. Designed with high safety factor to prevent fatigue fracture.
  • Temperature monitoring by thermal sensors (140 °C) in the stator windings.
  • Seal monitoring by a moisture probe (DI) in the seal chamber which signals an inspection alert if there is leakage at the shaft seals.
  • Smooth outer design to reduce rag build-up.
  • Stainless steel lifting hoop.
  • DN 80, DN 100 and DN 150 radial slot DIN flange discharge.
  • Maximum allowable temperature of the medium for continuous operation is 40 °C.
  • Maximum submergence depth of 20 m.
  • Explosion-proof as standard, in accordance with international standards Exd II BT4 and ATEX.

Discharge

DN 80, 100 and 150 DIN flange.

Temperature monitoring

Temperature monitoring by thermal sensors (140 °C) in the stator windings.

Seal monitoring

Seal monitoring by a moisture probe (DI) in the seal chamber which signals an inspection alert if there is leakage at the shaft seals.

Motor

Premium Efficiency IE3, three-phase, squirrel-cage motor; 400 V; 50 Hz; 2-pole (2900 r/min), 4-pole (1450) and 6-pole (980).

Protection type IP 68, with stator insulation Class H.

Start-up:
1.3 - 2.9 kW = direct on line (DOL)
4.0 - 11.0 kW = star-delta (YΔ).

Motors with other operating voltages and frequencies are also available.

Standard and options

Description

Standard

Option
Mains voltage
 Stainless Steel 1.4021
(AISI 420)		 230, 500, 230/400, 400/695, 500/866 V
Voltage tolerance ±10%
Motor efficiency Premium Eff. IE3
Insulation class H
Temperature monitor Bi-metallic switch Thermistor
Seal monitor
 DI moisture probe
Start-up
 Direct on line (DOL), star-delta (YΔ)
Approvals
 Ex
Mechanical seal (at medium side)
 SiC-SiC
Mechanical seal (at motor side) SiC-C
O-rings NBR
Cables S1BN8-F EMC
Cable length (m) 10 20, 30, 40, 50
Protective coating 2k Epoxy 120 μm 2k Epoxy 400 μm
Provision for lifting hoist Lifting hoop (150 mm height)
Cooling Self-cooling
Installation Wet well Dry well or transportable

 

Materials

Description

Material
Motor Housing
 Cast iron EN-GJL-250
Volute
 Cast iron EN-GJL-250
Impeller Cast iron EN-GJL-250
Bottom plate Cast iron EN-GJL-250
Motor shaft Stainless steel 1.4021 (AISI 420)
Lifting hoop Stainless steel 1.4401 (AISI 316)
Fasteners Stainless steel 1.4401 (AISI 316)

 

Downloads

 

Should you require further information regarding any of the products or services we offer, or to arrange a sales appointment, call: 020 8991 6650 or e-mail sales@spse.co.uk

If you have a pumpstation or pumping equipment requirement and you know what you are looking for click here if you are unsure complete our online pump station enquiry form here, we can provide a proposal please remember to complete all fields.

Alternatively if you would like one of our friendly, experienced team to make contact with you, complete and submit our request a call back form by clicking here.

ABS Pumps Product Links

ABS Pumps Only

ABS Pumps Lifting Stations

More Links

Resources

Contact