ABS Pumps - ABS Robusta 200 and 300

Type key Example: ABS Robusta 200 & 300
Robusta
 Light Drainage pump
200 & 300
Pumps down to 3 mm 
(manual operation only).
1 1/4" F BSP
C/W Hose adaptor (3/4", 1")
W
 AC 1~ 230V. 50Hz
TS
 With Floatswitch
Properties:  
Flow up to: 10 m³/h
  Head, max 9.5m
Head, Max: 9.5m

ABS Robusta 200 and 300 - light drainage pump

Plug-in, submersible pump, for the removal of wastewater containing solids up to 10 mm, in accordance with EN 12050-2.

Applications

The ABS Robusta 200 and 300 series has been designed for fixed or transportable installation, and for internal or external applicationssuch as emptying containers and drainage pits, draining of swimming pools or flooded cellars, and removal of nuisance water from gullies or pedestrian underpasses.

Construction

  • Single-phase, 50 Hz, 2-pole motor; insulation class B; protection type IP 68. Motor is dynamically balanced with stainless steel shaft. Thermal sensors in the stator switch off the pump in the case of overheating and automatically switch it back on after cooling down.
  • The stainless steel rotor shaft is supported in lubricated-for-life ball bearings.
  • Connection chamber with cover and watertight cable inlet and strain relief.
  • Discharge outlet with internal thread, built-in checkvalve, and detachable multi-stage hose adaptor.
  • Shaft sealing is by three lip seals, single at the motor side and double at the medium side, separated and lubricated by a grease chamber.
  • The medium being pumped flows around the motor housing for optimum heat dissipation. The maximum allowable medium temperature is 40 °C; or up to 60 °C for intermittent usage (max 5 minutes).
  • Built-in automatic level control, with easily removable float cover for cleaning purposes.
  • Integrated switch for continuous operation in transportable applications.
  • Bayonet clamping allows the screen to be removed by hand in the event an impeller inspection is necessary.

Features

  • ABS Robusta is fitted with an automatic level control. For transportableapplications, the Hand-Auto switch can be changed to continuous operation.
  • The checkvalve built into the discharge outlet blocks returnflow from the discharge line when the pump is switched off.
  • Checkvalve, hose adaptor and 10 m cable with Europlug included as standard.
  • Suitable for small sumps (from 300 x 300 mm).
  • Detachable suction ring. When fitted into the impeller screen allows pumping down to 3 mm (manual operation only).

Materials

Materials
Pump Casing
 Polypropylene
Motor Shaft

Stainless steel 1.4028 (AISI 420)
Impeller
Polyamide
Seals
 NBR
Cable
 Neoprene

 

Installation

Attention to the backwash level is of vital importance for effective dewatering. All outflow points located below the backwash level must be protected against back flow according to standard EN 12056.

Downloads

 

Should you require further information regarding any of the products or services we offer, or to arrange a sales appointment, call: 020 8991 6650 or e-mail sales@spse.co.uk

If you have a pumpstation or pumping equipment requirement and you know what you are looking for click here if you are unsure complete our online pump station enquiry form here, we can provide a proposal please remember to complete all fields.

Alternatively if you would like one of our friendly, experienced team to make contact with you, complete and submit our request a call back form by clicking here.

ABS Pumps Product Links

ABS Pumps Only

ABS Pumps Lifting Stations

More Links

Resources

Contact