ABS Pumps - ABS lifting station Synconta 901 - 902L

Type key Example: Synconta 901 - 902L
Synconta
 Synthetic Pumping Station
AS (DN50)
 Wastewater Pump
Piranha (DN32)
 Grinder Pump
Properties:  
Flow up to: 70 m³/h
  Head, max 5m
Head, Max: 36m

ABS Synconta 901 - 902L - lifting station

Synthetic prefabricated sump, designed as a single or double pumping station for the automatic pumping of wastewater and sewage from locations and areas below the backwash level in accordance with EN 12050-1. Designed as a complete wastewater sump for below-ground installation and for fitting with ABS pumps from thePiranha and AS ranges.

Features

  • Installed with a concrete lid, outside the building in open ground. Synconta is suitable for installations according to EN 124; Group 1 permissible traffic tonnage 5 kN/m2. Maximum permissible outside pressure 0.4 bar.
  • Stainless steel discharge pipe with 2” external thread.
  • Synconta 901: one pump, 902: two pumps. Standard depth version - 1690 mm.
  • Synconta 901L: one pump, 902L: two pumps. Maximum depth version - 2190 mm.
  • Eight inflow ports (4 x DN 100, 4 x DN 150) for DIN push-on connection. One DN 100 port reserved for venting and use as a cable duct.
  • Simple pump installation and maintenance, it is not necessary to enter the sump. The pump seals automatically onto the discharge line when lowered into the high level coupling.
  • Pneumatic level control system.
  • Maximum allowable temperature of medium 40 ºC, short term to 60 ºC (max. 5 minutes).

Tank

Synthetic, corrosion-resistant tank in accordance with EN 12050-1. Supplied as standard with high-level coupling and bracket, ball type non-return valve, shut-off valve and pneumatic level control. Tank cover and pump(s) not included.

Capacity (L):
945 (Synconta 901 & 902)
1250 (Synconta 901L & 902L)

Weight (kg)*:
85 / 96 (Synconta 901 / 902 DN 32)
96 / 121 (Synconta 901 / 902 DN 50)
116 / 127 (Synconta 901L / 902L DN 32)
127 / 152 (Synconta 901L / 902L DN 50)
* Includes installation pipework but not weight of pump

Motor

Water pressure sealed, squirrel cage 2- and 4-pole induction motor with triple shaft seals and oil chamber. Electronic monitoring of stator temperature and overcurrent.

Insulation: Class F to 155 ºC
Protection type: IP 68

Pump Types

  • ABS submersible wastewater pump AS. With Contrablock or vortex hydraulics for pumping clear water, wastewater and sewage with large solid particles present. Up to 60 mm solids passage.
  • ABS Piranha submersible grinder pump. Shredding system hydraulics which can cut and pump wastewater containing solids through small diameter discharge lines from 1¼”.

Materials

Description Material
Tank Polyethylene (PE)
AS  
Motor Housing Cast iron EN-GJL-250
Rotor Shaft Stainless steel 1.4021 (AISI 420)
Volute Cast iron EN-GJL-250
Impeller/Bottom plate Cast iron EN-GJL-250
Fasteners Stainless steel 1.4401 (AISI 316)
Piranha  
Upper Lid * Stainless steel 1.4301 (AISI 304)
Motor Housing Cast iron EN-GJL-250
Rotor Shaft Stainless steel 1.4021 (AISI 420)
Volute Cast iron EN-GJL-250
Impeller ** Cast iron EN-GJL-250
Fasteners Stainless steel 1.4401 (AISI 316)
* Piranha 08/09
** Polyamide for Piranha 08

Downloads

 

Should you require further information regarding any of the products or services we offer, or to arrange a sales appointment, call: 020 8991 6650 or e-mail sales@spse.co.uk

If you have a pumpstation or pumping equipment requirement and you know what you are looking for click here if you are unsure complete our online pump station enquiry form here, we can provide a proposal please remember to complete all fields.

Alternatively if you would like one of our friendly, experienced team to make contact with you, complete and submit our request a call back form by clicking here.

ABS Pumps Product Links

ABS Pumps Only

ABS Pumps Lifting Stations

More Links

Resources

Contact