ABS Pumps - ABS lifting station Sanimat 1002

Type key Example: ABS Sanimat 1002
Piranhamat
 Synthetic Pumping Station
D
 D (400V)
HD
 High Head
Properties:  
Flow up to: 40 m³/h
  Head, max 10m
Head, Max: 10m

ABS Sanimat 1002 - lifting station

Flood-proof, double lifting station, for automatic sewage pumping from areas below the backwash level in accordance with EN 12050-1. Ideal for effective dewatering of domestic residences or commercial developments. Suitable for new installations or for renovation of old buildings.

Features

  • Plug-in unit with CEE plug and phase sequence changeover facility.
  • Easily transported and fitted. Compact dimensions allow passage through a standard door opening.
  • Dynamic pressure level sensor on the tank, with separate sensors for inflow level and high water alarm.
  • Trouble-free maintenance thanks to simple removal of the motor housing.
  • Five horizontal inlet ports (4 x DN 100, 1 x DN 150) and three vertical (2 x DN 100, 1 x DN 150). Vertical vent line DN 70. Two small diameter ports (DN 40/50) suitable only for wastewater. DN 40 is suitable for connection of a hand membrane pump.
  • Discharge flange DN 80, plus flanged socket with 4” sleeve and clips (for discharge pipe DN80/100).
  • Integrated valve system consisting of two ball-type, non- return valves.
  • Two pumps; very quiet thanks to 4-pole, slow-running motors.
  • Direct toilet connection possible in the case of wall-mounted WC units.
  • Vortex impeller with large free passage and rear blade mounting, for reliable pumping of both faecal and faecal-free sewage.
  • Sloping container floor prevents deposits.
  • Built-in mains alarm (visual and acoustic), can be converted to mains-independent by inserting battery.
  • Maximum allowable temperature of the medium is 40 ºC; or up to 60 ºC intermittent (max. 5 minutes).

Tank

Synthetic, corrosion-resistant, gas- and odour-tight tank, in accordance with EN 12050-1. Supplied as standard with pumps, automatic level control and control box, non-return valves, 4” sleeve and flange.

Capacity: 140 litres

Motor

Water pressure sealed, squirrel cage 4-pole induction motor, with triple shaft seals and oil chamber. Electronic monitoring of stator temperature and overcurrent.


Insulation: class F for 155 °C
Protection type: IP 68

Materials

Description Material
Tank Polyethylene (PE)
Motor Housing Cast iron EN-GJL-250
Rotor Shaft Stainless steel 1.4021 (AISI 420)
Volute Polyethylene
Impeller Cast iron EN-GJL-250

Technical Data

Sanimat
 102D 1002 D/HD
Discharge Connection
 Sleeve 4” DN 100 Sleeve 4” DN 100
Motor power* (kW)
 P1 = 1.77 P2 = 1.40 P1 = 2.88 P2 = 2.20
Speed (r/min) 1450 1450
Rated voltage (V) 400 3~ 400 3~
Rated current (A) 3.5 5.2
Cable length (m)** 4 + 1.5 4 + 1.5
Weight (kg)***
 115 117

* P1 = Power taken from mains; P2 = Power at motor shaft
** Tank to control unit 4 m, control unit mains 1.5 m
*** Additional weight with hand membrane pump = 13 kg

Downloads

 

Should you require further information regarding any of the products or services we offer, or to arrange a sales appointment, call: 020 8991 6650 or e-mail sales@spse.co.uk

If you have a pumpstation or pumping equipment requirement and you know what you are looking for click here if you are unsure complete our online pump station enquiry form here, we can provide a proposal please remember to complete all fields.

Alternatively if you would like one of our friendly, experienced team to make contact with you, complete and submit our request a call back form by clicking here.

ABS Pumps Product Links

ABS Pumps Only

ABS Pumps Lifting Stations

More Links

Resources

Contact