ABS Pumps - ABS Piranha Submersible Grinder Pump 08 to 110

Type key Example: ABS Piranha Grinder 08 to 110
Piranha
 Submersible Grinder Pump
08 - 09
s10 - s26
M50 - M110		 G 1¼” internal thread
G 1¼” with oval flange
DN 50 with DIN-flange
EX
 Piranha 10 to 110
KS
 With Floatswitch
Properties:  
Flow up to: 30 m³/h
  Head, max 80m
Head, Max: 80m

ABS Piranha grinder 08 to 110 - Submersible Grinder Pump

ABS Piranha submersible grinder pumps for problem-free pumping of sewage containing faecal matter in pipe lines from 1¼” (DN 32)

Applications

The ABS Piranha submersible grinder pumps have been designed for effective and economical dewatering tasks using discharge lines of small diameter in private, municipal and industrial areas.
  • For sewage removal from living units and houses in scattered settlements where the laying of a conventional sewer would be too expensive, or where large ground undulations are present or where it is only possible to lay pipe lines of small diameter.
  • For sewage removal from motorway resting sites, communal buildings and for renovation of buildings or parts of a city.
  • For use in slaughter houses, food processing plants, paper factories, agriculture and similar areas.
  • ABS Piranha 08 and 09 are specially designed for private and domestic applications.

Medium Pumped

Faecal matter and heavily polluted sewage, max. medium temperature: continuous operation = 40° C or if unit is submerged, short term to 60° C (max. 5 min).

Construction

The water pressure tight encapsulated fully flood proof motor and the pump section form a compact robust unit construction.

Motor

Three phase 400 V 3 or single phase 220-240 V, 50 Hz, 2-pole (2900 min-1) or 4-pole (1450 min-1), insulation class F, protection type IP 68, cooled by amply dimensioned cooling areas. Other voltages and units suitable for 60 Hz operation are also available. Motor in explosive proof version type EEXd IIB T4 and FM/CSA.

Bearings

The motor shaft is supported in lubricated-for-life ball-bearings.

Shaft sealing

Between motor and hydraulic section by means of high quality sealing unit using a silicon carbide mechanical seal, independent of direction of rotation and resistant to temperature shock, motor side: Lip seal oil lubricated.

Discharge

ABS PIRANHA 08 and 09 = G 1¼” internal thread
ABS PIRANHA S10 to S26 and M30 = G 1¼” with oval flange
ABS PIRANHA M55 to M110 = DN 50 with DIN-flange

Shredding System

consisting of spiral bottom plate with stationary cutter ring with cutting edges and a shredding rotor located before the impeller for optimum blockage-free running .

TCS-Thermo-Control-System

By means of thermal sensors in the stator to give a warning and to switch off the motor in the event of excessive temperatures occurring (PIRANHA 30 to 110 and 12 Ex to 110 Ex).

DI-System

For seal monitoring consisting of an electrode in the motor and oil chamber (motor housing only - Ex) and an optical and/or acoustical inspection indication should leakage at the shaft sealing occur (optional).

Features

  • Unique ABS PIRANHA grinder shredding system capable of shredding cloths and plastic bags
  • For the pumping of wastewater containing sewage, offal, organic and industrial effluent
  • PIRANHA 10/4 to 110/2 fitted with modular AS and AFP motors
  • Low installation costs
  • Advantage of small discharge lines from 1¼” (DN 32)
  • Installations are possible where large ground undulations are present
  • PIRANHA 08 and 09 use modular MF motor
  • Standard and Ex-versions available (PIRANHA® 10 to 110)
  • PIRANHA 08 and 09 do not need a control box as capacitor or relay in upper lid

Materials

Description

Material
Motor Housing/Volute
 Cast Iron GG-25
Rotor Shaft
 Stainless Steel
1.4021 (AISI 420)
Volute, Impeller *
 Cast Iron GG-25
Mechanical Seal
 Neoprene
Fasteners Stainless Steel
1.4401 (AISI 316)

 

*Polyamide for PIRANHA 08

Downloads

 

Should you require further information regarding any of the products or services we offer, or to arrange a sales appointment, call: 020 8991 6650 or e-mail sales@spse.co.uk

If you have a pumpstation or pumping equipment requirement and you know what you are looking for click here if you are unsure complete our online pump station enquiry form here, we can provide a proposal please remember to complete all fields.

Alternatively if you would like one of our friendly, experienced team to make contact with you, complete and submit our request a call back form by clicking here.

ABS Pumps Product Links

ABS Pumps Only

ABS Pumps Lifting Stations

More Links

Resources

Contact