Wilo-Drainlift WS900 - Moulded PE Sump Pump Station
| Type key Example: |
WS 900E/TP 40 s |
| WS |
Moulded PE sump pump station |
| 900 |
Sump diameter
900 = 900mm
1,100 = 1,100mm |
| E |
E = Single pump
D = Double pump |
| TP40s |
Selected pump type |
|
|
Applications
Pumping wastewater and sewage from building
systems, rooms and from surfaces below the backflow level (EN 752/EN 12050). The moulded PE sump pump station is designed for outdoor underground installation without the necessity of associated concrete work. A timesaving, cost-effective and easy-to-install
solution
for every planner and builder.
Suitable for use as a ready-to-install sump pump station in gravity drainage systems.
Applicable Product Types:
The Wilo-Drainlift is a complete packaged pumping station manufactured from synthetic materials utilising the very latest production technology.
Either 900 or 1100mm diameter tank a choice of single ot twin pumps, cutter pump option also available.
Wilo-DrainLift WS900 Economy:
The Wilo-DrainLift WS900 Economy utilises integrated float switch control and thus eliminates the need for a separate control panel. Ideal for those applications where an economy price is required.
Wilo-DrainLift WS900/1100:
The Wilo-DrainLift WS900/1100 is a packaged lifting station complete with control panel and high level alarm.
Applicable Pump Types:
Wilo TS40:
For slightly contaminated fluids, 10mm free ball passage, detachable power cable.
Wilo TP50:
For heavily contaminated fluids, 48mm free ball passage, detachable power cable.
Wilo TP65:
For heavily contaminated fluids, 48mm free ball passage, detachable power cable.
Wilo TP80:
For heavily contaminated fluids and faeces, 78mm free ball passage, Explosion protected as standard, detachable power cable.(single pump station only)
Wilo TP40s:
For heavily contaminated fluids and sewage, Explosion protected as standard (3~ 400v only), detachable power cable. With patented macerator:
- Inside rotating blade
- Conically designed macerator
- Absolutely reliable operation
Design:
- Maximum working load 5 kN/m2 (in accordance with DIN EN 124. Group 1)
- Maximum pressure in the
pressure
line 6 Bar
- Moulded PE sump pump station made of recyclable PE
- Highest degree of buoyancy protected due to 2/4 (WS 900 = 2, WS1100 = 4) side fins fitted as standard (no concrete rings required)
- 2/4 inlets selectable on-site
- Maximum stability due to hemispherical shaft bottom
- Wilo above-water coupling
- 2 ports DN100 for vet and power cable duct
- Sediment-free collection chamber due to hemispherical shape of the PE moulded sump bottom
- Easy access to the level sensor due to installation with suspended holding rod
Scope of delivery
- Stainless steel discharge pipe from pump discharge port to approx. 10cm outside the shaft
- Above water coupling system including seals
- Check
valve, gate valve, completely assembled
- Flushing connection G11/2"
- Stainless steel chain including fixing hook
- Holding pipe for level monitoring (level sensor Type N Float switch)
-
Installation
and operating manual
Double pump stations are always supplied with twice the number of above-water couplings and fittings.
Mechanical Accessories for DrainLift WS900/1100 sump pump station and WS Economy
Wilo DrainLift - High level alarm battery operated high level alarmm and float switch for WILO-DrainLift WS900 Economy.
Wilo DrainLift - Sump shaft extensions made of PE (dia. 730mm x 800mm), incl. installation accessories, seal and holding rod extension for level sensor (custom lengths
available
upon request). Extensions may not be connected to each other, A maximum of 1 extension is possible per shaft.
Wilo DrainLift - Sump cover standard made of PE "Standard" (dia. 830mm), incl. non-slip profile on the top side and two locks on the inside. Class A for pedestrian traffic.
Wilo DrainLift - Sump cover flood proof made of PE "Submersible" (dia 830mm x 100mm), incl. non-slip profile on top and six stainless steel locks for locking to the outside. Class A for pedestrian traffic.
Clamping connector made of PE for out discharge pipe connection outside of the sump
- 11/2" (Rp(JG)) with 50mm outer dia.
- 11/2" (Rp(JG)) with 65mm outer dia.
- 2" (Rp(JG)) with 63mm outer dia.
Product Advantages
Wilo-Drainlift WS
- Sediment-free collection chamber
- Maximum stability due to hemispherical bottom
- 2/4 inlets selectable on-site
Click here for Wilo-Drainlift WS 900 - Dimensions
Click here for Wilo-Drianlift WS1100 - Dimensions
Click her for pump chart Wilo-Drain TP overview
|
